3 main technical data
The rated working voltage: DC:220V, 110V, 48V, 24V.
The rated working current: DC:0.25A, 0.5A, lA, 1.5A, 2A, 4A, 8A.
- keep the rated current: DC:0.5A, 0.5A, lA, 2A, 4A, 8A.
- keep the rated voltage: DC:220V, 110V, 48V, 24V.
] action value: the ambient temperature is 20 I 2 DEG C under the condition, the actuating voltage of voltage type for 50% - 70% of the rated power ratio; action current of electric type 8 not more than 80% of the rated current.
The return value: Gang Tun environmental temperature of 20+1 DEG C under the condition, the return value is not less than 5% of rated value.
- maintain value: in the conditions of ambient temperature for 20:2 under 0C
A. has kept winding current products, the self holding current f:80% rated current value is not maintained;
B. has to maintain the voltage winding products, the voltage is not greater than 70% of rated voltage valuekeeping.
] action time: at ambient temperature for 20 I 2-C < 1: Ding for winding applying amount of incentives for ratings, D2K-900/8 five time is less than 8ms, DZK-900/4 action time is not J:4ms (four pairs of contacts to bu increased 0.5 ms). DZK-900/4 a
Product action time (four to 1:5ms had little contact above 0.5ms).
The return time: around the interference temperature is 20 + 2C, DZK-900 / 8 return time of not more than 5ms /DZK-900
The return time is not more than 2ms.
- power consumption: less than 10W (including external resistance).
] contact content clear: no more than 250V voltage, the electric current does not exceed 5a, the time constant for 5+0.75ms DC a sensor circuit load, / T
Product output contact breaking capacity for 50W. The output contacts in the above specified load conditions, P /1; products can rely on action and return 5 x 10
Time. The output current is 5A connected to allow long-term contact.
] dielectric strength: products of each conductive terminal even in,, of the exposed non electrical metal parts or between the shell, bear 2000V (effective Yang
50Hz AC voltage test lasted 1 minutes without insulation breakdown or flashover phenomenon.
The voltage coil series resistance of the control table
