Use
DX - 11, DX - 11A, DX - 11Q signal relay protection circuit for the DC, as the signal indicator.
The main technical data
|
Rated voltage: |
220V、110V、48V、24V、12V； |
| Rated current |
0.01A、0.015A、0.025A、0.05A、0.075A、 0.1A、0.15A、0.25A、0.5A、0.75A、1A； |
| Action: |
action current value is less than 90% of rated current, voltage is not greater than 70% of rated voltage; : |
|
Power consumption: |
The current is no more than 0.3W, the voltage is not greater than 2W; |
| Dielectric strength: | relay of the circuit of the exposed non electrical metal parts should be tolerated AC 50Hz, voltage 2KV, which lasted 1min test no breakdown or flashover phenomena. |
Note: the DX 11Q installation shell is embedded board wiring, and other DX - 11; DX-11A 6 terminal shell bottom seat.
