Use
DXM - 2A type signal relay
(hereinafter referred to as the relay protection circuit) suitable for DC operation and automatic control circuit as the distance return action indicator.
The main technology
|
The working winding amount value: |
220V、110V、48V、24V、0.01A、 |
|
The release amount of the value of winding: |
220V、110V、48V、24V。 |
|
Action value: |
Starting current relay operation value does not exceed the rated current; Start voltage relay operation value does not exceed 70% of rated voltage.
|
|
Release voltage: |
No more than 70% of the rated voltage. |
|
Between action and return: |
No more than 5ms. |
|
Power consumption: |
The current working winding is not greater than 0.15; voltage winding is not greater than 2W; The release of the working winding is not greater than 3.5W.
|
|
Contact capacity: |
No more than 250V voltage, the electric current does not exceed 5a, the time constant for 5 + 0.75ms DC sense circuit load, product output contact breaking capacity is 50W. The output contacts in the above specified load conditions, the product can act reliably and return 5 * 104 times. The output current is 5A connected to allow long-term contact. |
|
Medium strength: |
Products of each conductive terminal even together, on the exposed uncharged metal part or between the shell, bear 2000V (RMS) 50Hz AC voltage which lasted 1 minute test without dielectric breakdown or flashover phenomenon |
